Maintenance
2Loosen the locking nuts (1).
3Tension the cable using the adjuster screw (2) until the play in the cable is taken up.
4Tighten the locking nuts (1).
5The brake should be checked again after adjustment
6 Assemble the
Checking and adjusting of throttle wire
The throttle cable may need to be adjusted, if the engine does not respond as it should when accelerating, if it produces black smoke or maximum revs are not reached.
If doubts arise, contact your service representative.
1Loosen the clamping screw for the cable’s outer casing and move the throttle to the full throttle position.
2Pull the choke wire casing to the far right and tighten the clamping screw.
3Pull back the throttle to the full throttle position and check that the choke is no longer actuated.
Replacement of fuel filter
Replace the fuel filter every 100 running hours (once per season) or more frequently if it is clogged.
Replace the filter as follows:
1Open the engine cover.
2Move the hose clips away from the filter. Use a pair of flat pliers.
3Pull off the filter from the hose ends.
4Press the new filter into the ends of the hoses. If necessary apply liquid detergent to the ends of the filter to facilitate connection.
5Push the hose clips back on the filter and tighten.
English – 23
