Datalogic Scanning 6000 - page 44

40 QuickScan 6000/6000 Plus
Setting Symbology Specific Label Identifiers (Label I.D.)
(Continued)
4. Scan the label representing the symbology whose label
identifier you wish to modify.
In our example, we would scan the 'UPC-A' symbology label.
5. Identify and scan the digits that correspond to the Hex
Values.
The hex values from the ASCII chart that correspond to 'A1'
from our example are as follows: 41hex = 'A', and
31hex = '1'. Thus, we would scan digit programming labels in this
order: 4, 1, 3, 1.
6. Scan the END label.
In our example, you have changed the default label identifier
prefix for UPC-A from 'A' to 'A1'.
SET ----------------------------------------------
DISABLE LABEL I.D. CONTROL -------
TRANSMIT LABEL I.D. AS PREFIX-----
TRANSMIT LABEL I.D. AS SUFFIX-----