Datalogic Scanning 6000 manual Wand Keyboard

DEFAULT

	Wand			Keyboard	Record Your
FEATURE	Emulation	RS-232	SNI RS-232	Wedge	Default Set
General Features
Audible Signal	Enable	Enable	Enable	Enable
Power-Up Beep	Enable	Enable	Enable	Enable
Beeper Volume	High	High	Low	High
Beep Duration	100ms	100ms	100ms	100ms
	Beep/LED After	Beep/LED After	Beep/LED After	Beep/LED After
When to Beep	Decode	Decode	Decode	Decode
Low Power Mode	Disable	Disable	Disable	Disable
Debug Mode	Disable	Disable	Disable	Disable
AutoSense Stand Mode	Disable	Disable	Disable	Disable
IBM I/F s Settings
IBM Port 5B I/F	N/A	N/A	N/A	N/A
IBM Port 9X I/F	N/A	N/A	N/A	N/A
IBM Port E I/F	N/A	N/A	N/A	N/A
Send as Code 39	N/A	N/A	N/A	N/A
Limit Command Set	N/A	N/A	N/A	N/A
Unsolicited Status	N/A	N/A	N/A	N/A
OCIA I/F
DLS OCIA I/F	N/A	N/A	N/A	N/A
NCR OCIA 8-Bit I/F	N/A	N/A	N/A	N/A
NCR OCIA 9-Bit I/F	N/A	N/A	N/A	N/A
SNI OCIA I/F	N/A	N/A	N/A	N/A
Beep if Not on File	N/A	N/A	N/A	N/A
Host Commands	N/A	N/A	N/A	N/A
Intercharacter Delay	N/A	N/A	N/A	N/A
Wand Em. I/F Settings
Wand Emulation I/F	Enable	N/A	N/A	N/A
	Space Low, Bar
Polarity	High	N/A	N/A	N/A
	660µsec/
Signal Speed	module	N/A	N/A	N/A
	Transmit as
Data Format	normal	N/A	N/A	N/A
Idle State	Idle Low	N/A	N/A	N/A
Transmit Pre-Noise	Enable	N/A	N/A	N/A
Transmit C128 Function
Characters	Enable	Disable	Disable	Disable