STORAGE

Winter storage

At the end of the season the machine should immediately be put in order for storage, also if it is going to stand idle for more than 30 days. Fuel which is left to stand for long periods (30 days or more) can leave tacky deposits which can block the carburettor and interfere with the engine.

Fuel stabiliser is an acceptable alternative to avoid tacky deposits during storage. If alkylate petrol (Aspen) is used stabiliser is not necessary since this fuel is stable. However, one should avoid changing from standard to alkylate petrol since sensitive rubber parts can harden. Add stabiliser to the fuel in the tank or the storage container. Always use the mixing ratios indicated by the manufacturer. Run the engine for at least 10 minutes after adding the stabiliser so that it will reach the carburettor. Do not empty the fuel tank and carburettor if stabiliser has been added.

!WARNING!

Never place an engine with fuel in the tank indoors or in poorly ventilated areas where petrol fumes can come into contact with naked flames, sparks or pilot flames in boilers, hot water heaters, or drying cabinets, etc. It is highly inflammable and negligent usage can cause severe person injury and material damage. Drain off the fuel in an approved container outdoors and well clear of naked flames. Never use petrol for cleaning purposes. Use degreasing agents and hot water instead.

To put the machine in order for storage follow these instructions:

1.Carefully clean the machine, especially under the cutting unit. Touch-up paint damage to avoid rust.

2.Inspect the machine for worn or damaged parts and tighten loose screws and nuts.

3.Change the oil, and take care of the waste oil.

4.Empty the fuel tank. Start the engine and run it until the carburettor is emptied of fuel.

5.Remove the plugs and pour in a tablespoon of engine oil in each cylinder. Pull round the engine to distribute the oil and screw the plugs back on.

6.Grease all grease nipples, joints and axles.

7.Remove the battery. Clean it, charge it, and store it in a cool place. Protect the battery from low temperatures (below freezing point).

8.Store the machine in a clean and dry place and cover it over for extra protection.

Service

When ordering spare parts state the purchase year, model, type, and serial number.

Always use genuine parts.

Annual inspection or trimming by an authorised service workshop is a good way of getting the best out of your machine the next season.

40 – English

Page 41 Page 43
Page 42
Image 42
Husqvarna 18 ProFlex, 20 ProFlex manual Storage, Winter storage, Service
Page 41 Page 43

18 ProFlex, 20 ProFlex specifications

Husqvarna, a trusted name in outdoor power equipment, has unveiled its latest offerings in the ride-on mower segment with the Husqvarna 18 ProFlex and 20 ProFlex models. These machines are designed to provide superior performance for both professional landscapers and avid gardening enthusiasts. The ProFlex series is characterized by its advanced engineering, making it ideal for tackling varied terrains and challenging mowing tasks effectively.

One of the standout features of both models is the innovative cutting system. Each mower is equipped with a high-performance cutting deck that utilizes a cutting width of 48 inches for the 18 ProFlex and 54 inches for the 20 ProFlex. This deck configuration allows for precise cutting, ensuring a clean and efficient mow, while also reducing the number of passes needed for larger areas. The adjustable cutting height further enhances flexibility, allowing users to choose the perfect setting for different grass types and conditions.

The Husqvarna ProFlex series also incorporates advanced technology that makes mowing easier and more efficient. The integrated intuitive control panel provides users with easy access to all essential functions, including mowing speed and blade engagement. The models feature a powerful engine, delivering robust performance and reliability even in challenging weather conditions. The 20 ProFlex is particularly noted for its impressive horsepower, enabling it to handle tougher terrains without compromising on efficiency.

Durability is another key characteristic of the ProFlex series. Both the 18 and 20 models are built with high-quality materials and boast a rugged chassis designed to withstand the rigors of regular use. This durability is complemented by superior ergonomics, ensuring that operators experience comfort during extended operation. The adjustable seat and steering wheel facilitate a customized fit for operators of all sizes.

In addition, Husqvarna has integrated advanced safety features into the ProFlex models. The automatic brake system enhances user safety by engaging whenever the operator leaves the seat, ensuring peace of mind during operation.

In conclusion, the Husqvarna 18 ProFlex and 20 ProFlex offer a blend of power, efficiency, and user-centric design. With their robust features, advanced technologies, and commitment to safety, these ride-on mowers are sure to meet the demands of both professional and residential users who seek to maintain pristine lawns and gardens. Whether tackling large properties or navigating tight spaces, the ProFlex series stands ready to deliver high-quality results.
Top Page Image Contents