MAINTENANCE
Checking and adjustment of the steering wires
The steering is controlled by means of wires.
These can in time become slack, which implies that the adjustment of the steering becomes altered.
Check and adjust the steering as follows:
1. Dismantle the
2. Check the tension of the steering wires by pushing them together (at the arrows).
It should be possible to push them together so that the distance between them is half as much, without using unnecessary force.
3.When necessary the wires can be tensioned by tightening the adjusting nuts (one on each side
of the machine).
Do not tension the wires too tightly, they should only be tightened up to the steering rim.
Check the wire tension on completion of the adjustment as per item 2.
English – 21
