DESCRIPTION
Other equipment
Throttle trigger (2)
The speed and the output of the engine are regul- ated by the throttle trigger. The throttle lock (4) must be pressed down before the trigger will actuate the throttle.
Fan casing (7)
The blower fan casing (7) together with the impeller (13) provide high performance air discharge.
Inspection cover (11)
An inspection cover is located on the underside of the fan casing. Removal of this cover allows access for cleaning and inspecting the impeller. The inspec- tion cover can only be opened by means of tools.
If the vacuum tube is used, it must be fitted to the opening in the inspection cover as shown on page 16.
!WARNING!
Never start the blower if the inspection cover is not closed, is damaged or cannot be closed. (Exception: When the vacuum tube is fitted).
Cutters (12)
2 | 4 |
7 13 12 11
Two cutters are fastened to the impeller. The cutters are there to mulch leaves and other debris, that have been vacuumed, before they enter the fan inlet.
Nozzle (14) and blower tube (15)
The nozzle and the blower tube have a bayonet mount for connection to the blower. Air is channeled through the blower tube to the nozzle, where the air discharge velocity increases and the air stream dis- charge pattern is formed to provide best perform- ance.
15 14
English – 9
