START AND STOP

Control before starting

For reasons of safety follow these recommendations!

•Check the blade to ensure that no cracks have formed at the bottom of the teeth

or by the centre hole. The most common reason why cracks are formed is that sharp corners have been formed at the bottom of the teeth while sharpening or that the blade has been used with dull teeth. Discard a blade if cracks are found.

• Check that the support flange is not cracked due to fatigue or due to being tightened too much. Discard the support flange if it is cracked.

• Ensure the locking nut has not lost its captive force. The nut lock should have a locking force of at least 1.5 Nm. The tightening torque of the locking nut should be 35-50 Nm.

Cold engine

IGNITION: Set the stop switch to the start position. CHOKE: Set the choke control in the choke position.

Warm engine

Use the same starting procedure as for the cold engine, but do not set the choke control in the choke position. The start throttle position is obtained by setting the choke control in the choke position and then returning it to its original position.

Stop

The engine is stopped by switching off the ignition.

R/RD

RJ

•Check that the guard is not damaged or cracked. Replace the guard if it is exposed to impact or is cracked.

•Check that the trimmer head and spray guard are not damaged or cracked. Replace the trimmer head or spray guard if they are exposed to impact or are cracked.

•Never use the machine without a guard or spray guard nor with a defective guard.

Start and stop

!WARNING!

The complete clutch cover with shaft must be fitted before the machine is started, otherwise the clutch can become loose and cause personal injury.

Always move the machine from the filling area before starting. Place the machine on a flat surface. Ensure the cutting equipment cannot come into contact with any object. Make sure no unauthorised persons are in the working area, otherwise there is a risk of serious personal injury. The safety distance is 15 metres.

!WARNING!

When the engine is started with the choke in the choke or start position the cutting equipment starts to rotate immediately.

Start

Press the machine body against the ground using your left hand (NOTE! Not your foot). Grip the starter handle, slowly pull out the cord with your right hand until you feel some resistance (the starter pawls grip), now quickly and powerfully pull the cord.

Reset the choke control as soon as the engine fires and repeat until the engine starts. When the engine starts quickly apply full throttle and the start throttle will automatically disengage. NOTE! Do not pull the starter cord out completely and do not release the starter cord from the fully extended position. This can damage the machine.

22 – English

Page 21 Page 23
Page 22
Image 22
Husqvarna 232R, 235R, 235FR, 225R, 225RD, 225RJ, 232R, 232RD, 235R Start and Stop, Control before starting, Start and stop
Page 21 Page 23

232R, 235R, 235FR, 225R, 225RD, 225RJ, 232R, 232RD, 235R specifications

Husqvarna, renowned for its expertise in outdoor power equipment, offers a range of robust strimmers that cater to both professional and homeowner needs. Among these are the models 225R, 225RD, 225RJ, 232R, 232RD, 235R, and 235FR. Each of these strimmers boasts unique features, advanced technologies, and characteristics that make them stand out in the competitive landscape.

The Husqvarna 225R is designed for residential use, featuring a lightweight design that ensures ease of maneuverability. Its Smart Start technology allows for quick starting with minimal resistance, making it user-friendly for amateurs and seasoned users alike. The model is powered by a reliable two-stroke engine which strikes an optimal balance between power and fuel efficiency.

The 225RD variant adds versatility with its dual-line cutting system, perfect for tackling thicker grass and weeds. This model also integrates an ergonomic handle, reducing fatigue during extended use and enhancing overall comfort.

Moving on, the 225RJ version is equipped with an adjustable cutting width, allowing users to adapt to various tasks. The reinforced trimmer head ensures durability while the low emissions technology adheres to environmental standards, making it a sustainable choice for the eco-conscious consumer.

The Husqvarna 232R builds on the strengths of its predecessor with increased power output, making it suitable for demanding landscaping tasks. Its robust build quality and sturdy materials enable it to withstand rigorous use, catering perfectly to landscaping professionals.

The 232RD model features a heavier-duty cutting head that facilitates tough weed clearance, ideal for larger properties. Additionally, it maintains a comfortable grip, aiding precision in operation.

The 235R introduces improved fuel efficiency, reducing the environmental impact without sacrificing performance. The easy-to-adjust harness and balance system distribute weight evenly, allowing for prolonged use without discomfort.

Lastly, the 235FR is designed for commercial use, featuring a high-capacity engine that maximizes output efficiency. The frame design allows for operation on steep terrains, ensuring versatility in applications, while the anti-vibration technology minimizes strain on the user’s hands, making long hours of operation more bearable.

In summary, Husqvarna’s lineup of strimmers — the 225R, 225RD, 225RJ, 232R, 232RD, 235R, and 235FR — represents an excellent amalgamation of power, user comfort, and eco-friendliness. Each model is tailored to meet specific needs, whether for homeowners or professionals, ensuring that superior cutting performance and reliability remain at the forefront of outdoor maintenance tasks.
Top Page Image Contents