MAINTENANCE

Final setting of the idling speed T

Adjust the idling speed with the screw T, If it is necessary to readjust. First turn the idle speed adjusting screw T clockwise until the cutting attachment starts to rotate/ move.

Then turn, counter- clockwise until the cutting attachment stops. A correctly adjusted idle speed setting occurs when the engine runs smoothly in every position. It should also be good margin to the rpm when the cutting attachment starts to rotate/move.

CAUTION! Contact your servicing dealer, if the idle speed setting cannot be adjusted so that the cutting attachment stops. Do not use the machine until it has been properly adjusted or repaired.

High speed needle

 

H

 

The high speed needle affects

 

the machine’s power, speed,

 

temperature and fuel

 

consumption. A too lean

 

adjustment on the high

 

speed needle H (the high

 

speed needle H is screwed in

 

too much) gives a too high

 

speed resulting in engine

 

damage. Do not allow the

 

engine to run at full speed

 

for more than 10 seconds.

 

Apply full throttle and turn

 

the high speed needle H

 

slowly anticlockwise until

 

the engine runs unevenly.

 

The high speed needle H is

 

then turned slowly clockwise

 

a little until the engine runs

 

smoothly.

 

Note the engine should be

 

run unloaded when

H

adjusting the high speed

 

needle. Therefore dismantle

 

the cutting equipment, nut,

 

support flange and disc drive

 

before adjusting the high speed needle. The high speed needle is adjusted correctly when the machine ‘splatters’ a little . If the machine smokes heavily at the same time as it ‘splatters’ heavily the adjustment is too rich.

NOTE! For optimum setting of the carburettor, contact a qualified servicing dealer who has a revolution counter at his disposal.

Correctly adjusted carburettor

A correctly adjusted carburettor means that the machine accelerates without hesitation and the machine 4-cycles a little at max speed. Furthermore, the cutting attachment must not rotate/move at idling. A too lean adjusted low speed needle L may cause starting difficulties and bad acceleration.

A too lean adjusted high speed needle H gives lower power

=less capacity, bad acceleration and/or damage to the engine.

A too rich adjustment of the two speed needles L and H gives acceleration problems or too low working speed.

24 – English

Page 23 Page 25
Page 24
Image 24
Husqvarna 232R, 235R, 235FR manual Final setting of the idling speed T, High speed needle, Correctly adjusted carburettor
Page 23 Page 25

232R, 235R, 235FR, 225R, 225RD, 225RJ, 232R, 232RD, 235R specifications

Husqvarna, renowned for its expertise in outdoor power equipment, offers a range of robust strimmers that cater to both professional and homeowner needs. Among these are the models 225R, 225RD, 225RJ, 232R, 232RD, 235R, and 235FR. Each of these strimmers boasts unique features, advanced technologies, and characteristics that make them stand out in the competitive landscape.

The Husqvarna 225R is designed for residential use, featuring a lightweight design that ensures ease of maneuverability. Its Smart Start technology allows for quick starting with minimal resistance, making it user-friendly for amateurs and seasoned users alike. The model is powered by a reliable two-stroke engine which strikes an optimal balance between power and fuel efficiency.

The 225RD variant adds versatility with its dual-line cutting system, perfect for tackling thicker grass and weeds. This model also integrates an ergonomic handle, reducing fatigue during extended use and enhancing overall comfort.

Moving on, the 225RJ version is equipped with an adjustable cutting width, allowing users to adapt to various tasks. The reinforced trimmer head ensures durability while the low emissions technology adheres to environmental standards, making it a sustainable choice for the eco-conscious consumer.

The Husqvarna 232R builds on the strengths of its predecessor with increased power output, making it suitable for demanding landscaping tasks. Its robust build quality and sturdy materials enable it to withstand rigorous use, catering perfectly to landscaping professionals.

The 232RD model features a heavier-duty cutting head that facilitates tough weed clearance, ideal for larger properties. Additionally, it maintains a comfortable grip, aiding precision in operation.

The 235R introduces improved fuel efficiency, reducing the environmental impact without sacrificing performance. The easy-to-adjust harness and balance system distribute weight evenly, allowing for prolonged use without discomfort.

Lastly, the 235FR is designed for commercial use, featuring a high-capacity engine that maximizes output efficiency. The frame design allows for operation on steep terrains, ensuring versatility in applications, while the anti-vibration technology minimizes strain on the user’s hands, making long hours of operation more bearable.

In summary, Husqvarna’s lineup of strimmers — the 225R, 225RD, 225RJ, 232R, 232RD, 235R, and 235FR — represents an excellent amalgamation of power, user comfort, and eco-friendliness. Each model is tailored to meet specific needs, whether for homeowners or professionals, ensuring that superior cutting performance and reliability remain at the forefront of outdoor maintenance tasks.
Top Page Image Contents