McIntosh MT10 owner manual Rear Panel Connections and Adjustments

Rear Panel Connections and Adjustments

AUDIO OUTPUTS connect to MC (Moving Coil) Inputs of the Pream- plifier or A/V Control Center when the McIntosh MCC10 Cartridge is installed. Contact your McIntosh Dealer for additional assistance.

GND (Ground) connects to GND (Ground) connection on the Preamplifier or A/V Control Center

Connect to the external Power Supply supplied with the MT10 Turntable. Then connect the Power Supply to a live AC outlet. Refer to informa- tion on the Power Supply to determine the correct voltage

POWER CONTROL REMOTE IN receives turn-on signals from a McIntosh component and switches the Front Panel Illumination On/Off.

POWER CONTROL RE- MOTE OUT sends turn- on signals on to another McIntosh Component

PLATTER LIGHT Fine adjustment of the Turntable Platter Illumination level

Fine speed adjustments for 33-1/3, 45 and 78 rpm. These Adjustments re- quire special test records and precision measure- ment equipment to accurately set the speeds. Contact your McIntosh Dealer for assistance.

11