![Assembling the Turntable, con’t](/images/new-backgrounds/28379/2837919x1.webp)
Figure 21
Assembling the Turntable, con’t
19.Locate the Mc- Intosh Bubble Level and place it on the Turntable Plat- ter Mat. If the Bubble is not in
the center circle of the Bubble
Level adjust the height the Turntable Feet (by rotating them clockwise or counter clockwise) until it is level. Refer to figure 21.
20.Carefully slide off the clear protective cover from the car- tridge by pulling the cover straight toward you.
21.Proceed to Rear Panel Connections.
10