Packing Instructions
Packing Instructions
In the event it is necessary to repack the equipment for shipment, the equipment must be packed exactly as shown below. It is very important the four feet are still attached to the bottom of the equipment. This will ensure the proper equipment location on the bottom pad. Failure to do this will result in shipping damage.
Use the original shipping carton and interior parts only if they are all in good serviceable condition. If a shipping carton or any of the interior part(s) are needed, please call or write Customer Service Department of McIntosh Laboratory. Refer to page 3. Please see the Part List for the correct part numbers.
Top
foam 
Turntable Platter pad
Center | Accessory box |
| |
foam |
|
pad |
|
Bottom |
|
foam pad |
|
| Turntable Platter/Accessories |
| Inner Carton |
| Turntable Top foam pad |
Turntable without Platter
Turntable Inner Carton with foot locating pad
(pad is inside the carton on the bottom)
Quantity | Part Number | Description |
1 | 034420 | Outer shipping carton only |
1 | 034424 | Turntable Platter/Accesories |
|
| Inner carton only |
2 | 034425 | Top and bottom foam pad |
1 | 034426 | Center foam pad |
1 | 034427 | Accessory box |
1 | 034421 | Turntable Inner carton only |
1 | 034422 | Turntable Top foam pad |
1 | 034419 | Bottom locating pad |
2 | 034423 | End caps |
Inner carton containing
Turntable Platter/Accessories
Inner carton containing
Turntable without
Platter
Outer shipping carton containing platter/ accessories inner carton and turntable inner carton
19
