Unpacking the Turntable
Unpacking the Turntable
To protect the fine finish of the MT10 Precision Turntable during the assembly and adjustment process, it is advisable to prepare a suitable clean working area with a soft, clean fabric, such as a bed linen or blanket.
It is recommended that the Professionals at your McIn- tosh Dealer, who are skilled in all aspects of installation and operation, unpack, assemble, adjust and install the MT10 Precision Turntable and any associated audio equip- ment.
CAUTION: To prevent possible damage to the turntable platter bearing, do not move the MT10 Preci- sion Turntable with the platter installed.
1.After opening the outer shipping carton, carefully remove the turntable inner carton (which has two foam end caps) and the turntable platter/accessory inner car- ton. Refer to figure 1.
2.Open the turntable inner carton and remove the top foam pad. Refer to figure 2.
3.Carefully lift up on the sides of the turntable and re- move it from the turntable inner carton.
4.Open the turntable platter/accessory carton and remove the the turntable platter. Refer to Figure 3
Top foam pad
Turntable
Figure 2
Turntable Platter
Accessories Box
Turntable Platter/ Accesory Carton
Turntable Carton
Outer
Shipping
Carton
Figure 1
Figure 3
5.Open the accessories box and check to make sure the following items are inside:
A.McIntosh MCC10 Moving Coil Cartridge.
B.External Power Supply.
C.Tonearm Counter Weight.
D.Turntable Record Clamp.
E.Turntable Bubble Level.
F.Assembly/Adjustment Tools.
G.Cartridge Mounting Hardware.
H.Pair of cloth gloves.
I.Turntable Bearing Oil
J.Tone Arm Height Guage (used for MCC10 Cartridge).
K.Protractor.
M. Cloth Dust Cover
N. Turntable Platter Mat.
Note: The Turnable Platter Mat is located in an album cover and in the Accessory box.
6.Proceed to Assembly of the Turntable starting on the next page.
7
