![](/images/new-backgrounds/1113003/1130039x1.webp)
SAFETY INSTRUCTIONS
4.Anti-vibration system
Your machine is equipped with an
The use of incorrectly wound cord or blunt, incorrect cutting equipment (incorrect type or incorrectly sharpened, see section “Filing the blade”) increases the level of vibration.
The machine’s anti- vibration system reduces the transfer of vibrations between the engine unit/ cutting equipment and the machine’s handle system. The engine body including the cutting equipment is suspended in the handle system via a vibration element.
!WARNING!
Over exposure to vibrations can result in
5.Quick-release
6. Muffler
The muffler is designed to
give the lowest possible noise level and to direct the
engine‘s exhaust fumes away from the operator. Muffler
fitted with catalytic
converter is also designed to reduce harmful exhaust
components. In countries that have a
warm and dry climate the risk of fire is obvious. We
have therefore fitted certain mufflers with a spark arrest
screen. Make sure that your
muffler is fitted with this kind of screen. It is extremely important that the instructions for checking, maintaining and servicing the muffler are followed. (See the section “Control, maintenance and service of the machine‘s safety equipment“.)
! WARNING!
Mufflers fitted with catalytic converters become extremely hot during use and after stopping. This also applies at idling speeds. Contact can result in burns to the skin. Be observant to the risk of fire!
! WARNING!
Bear in mind that exhaust fumes:
• contain carbon monoxide, which can
cause carbon monoxide poisoning. Therefore never start or run the machine indoors.
• are hot and can contain sparks that can cause fires. Never start the machine indoors or close to inflammable material.
7. Cutting
equipment1
1)Clearing blades are intended for cutting wood.
2) Grass blades are | 2 |
| |
intended for brush cutting. |
|
There is an easily accessible,
3)The trimmer head is intended for trimming grass.
8. Locking nut
3 |
and clearing saw“.
The locking nut secures the cutting equipment on the output shaft.
English – 5