3. INSTALLATION
IMPORTANT INFORMATION
Do not tread or walk on the charging station plate.
3.3 Charging the battery
Automower® is supplied with an uncharged battery. As soon as the charging station is connected, it is possible to charge the mower.
1.Set the main switch to the OFF position.
2.Place Automower® in the charging station to charge the battery while you are laying the boundary wire.
From an uncharged state the battery takes about 1 1/2 to 2 1/2 hours until it is fully charged.
IMPORTANT INFORMATION
Automower® cannot be used before the installation is complete.
3.4 Installation of the boundary wire
The boundary wire can be installed in one of the following ways:
•Securing the wire to the ground with staples.
It is preferable to staple down the boundary cable, if you want to make adjustments to the boundary wire during the first few weeks of operation.
•Bury the wire.
It is preferable to bury the boundary wire if you want to dethatch or aerate the lawn.
If necessary both methods can be combined so one part of the boundary wire is stapled down and the remainder is buried.
English - 21
