Husqvarna 260 ACX manual 3.9Activate the GPS anti-theft protection area, Installation

3.INSTALLATION

3.9Activate the GPS anti-theft

protection area

Before the anti-theft protection area can be activated, a SIM card must be installed and the administrator’s phone number must be entered into the GPS communication unit (see 4.3 Using GPS-communication on page 38).

1.Place Automower® at the centre of the required protection area, often in the middle of the lawn Automower® is going to mow. Avoid placing Automower® under trees, roofs or close to a house, as this weakens the GPS signal.

2.Set the main switch to the ON position.

3.Go to the mower's Security (4-1)menu, enter your PIN code and press YES. Place the cursor on GPS (4-1-4)and press YES. Select ON to

activate and press YES. Make sure that Alarm (4-1-3) and Time lock (4-1-2)are activated for total functionality. The GPS unit now automatically indexes the position as the central point. This can take up to 15 minutes.

4.Leave the mower in the same position until the GPS unit confirms the central point by sending an SMS containing the text Circular geofence On followed by the GPS coordinates for the central point.

5.Automower® has now an activated circular protection area with a radius of 100 metres from the central point. If the mower is moved outside the protection area, an alarm is triggered and the GPS communication unit sends an SMS alert message to the designated phone numbers. If required, the radius can be increased (see 4.3 Using GPS-communicationon page 38).

You can deactivate the GPS anti-theft protection at any time by going to the mower’s Security menu, entering your PIN code and deactivating the GPS (4-1-4). This may be of use, when the mower for instance must be transported to your dealer for a winter service.

36 - English