SAFETY INSTRUCTIONS

C Checking chain lubrication

•Check the chain lubrication

each time you refuel.

Aim the tip of the saw at a light coloured surface about 20 cm away. After 1 minute running at 3/4 throttle you should see a distinct line of oil on the light surface.

If the chain lubrication is not working:

1Check that the oil channel in the bar is not obstructed. Clean if necessary.

E Needle bearing maintenance

A

The clutch drum is equipped with one of the following chain sprockets:

• Spur sprocket (A) (the chain sprocket is welded on the drum)

•Rim sprocket (B)

(exchangeable)

B

Both versions have built-in needle bearing at the drive shaft, whitch has to be greased regularly (once a week).

NOTE! Use only high quality bearing grease.

FChecking wear on cutting equipment

Saw chain

2 Check that the groove in the edge of the bar is clean. Clean if necessary.

3 Check that the bar tip sprocket turns freely and that the lubricating hole in the tip is not blocked. Clean and lubricate if necessary.

If the chain lubrication system is still not working after carrying out the above measures you

Check the saw chain daily for:

•Visible cracks in rivets and links.

•Whether the chain is stiff.

•Whether rivets and links are badly worn.

We recommend you compare the existing chain with a new chain to decide how badly it is worn.

When the length of the cutting teeth has worn down to only 4 mm the chain must be replaced.

min 4 mm

(0,16")

should contact your service agent.

D Lubricating the bar tip sprocket

• Lubricate the bar tip sprocket each time you refuel. Use the special grease gun and a good quality bearing grease.

G Chain drive sprocket

The clutch drum is fitted with one of the following drive sprockets:

A

ASPUR (integral drive sprocket)

BRING (replaceable)

Regularly check the

 

degree of wear on the

B

drive sprocket. Replace if

 

wear is excessive.

 

Replace the drive sprocket whenever you replace the chain.

English – 15

Page 14 Page 16
Page 15
Image 15
Husqvarna 346XP 351 manual Checking chain lubrication, Needle bearing maintenance, Checking wear on cutting equipment
Page 14 Page 16

346XP 351 specifications

The Husqvarna 346XP and 351 chainsaws are celebrated models within the Husqvarna lineup, recognized for their excellence in performance, efficiency, and ease of use. Designed predominantly for professional use, these chainsaws incorporate advanced technology and ergonomic features that cater to the needs of tree care specialists, landscapers, and serious woodworkers.

One of the standout features of the Husqvarna 346XP is its lightweight design, which allows for easy maneuverability and reduced fatigue during extended use. Weighing around 10.8 pounds, the chainsaw is equipped with a powerful 50.1cc, 2.8 horsepower engine, delivering exceptional cutting performance while maintaining efficient fuel consumption. The model comes equipped with a 15 to 18-inch guide bar, providing versatility for various cutting tasks, from limbing to felling small trees.

The 351 model offers similar performance metrics but is designed slightly differently, featuring an improved air injection system for cleaner operation. This system actively collects debris before it reaches the air filter, extending the service intervals and enhancing engine life. The powerful 51.7cc engine on the 351 provides a higher power output compared to the 346XP, suited for even the most demanding cutting jobs.

Both chainsaws utilize Husqvarna’s X-Torq engine technology, which reduces fuel consumption by up to 20% while lowering emissions. This not only promotes environmental sustainability but also translates into cost savings for users. The LowVib technology integrated into both models minimizes vibrations, ensuring a more comfortable experience and reducing operator fatigue.

Enhanced safety features are also paramount in both chainsaws. The inertia-activated chain brake activates quickly in the event of a kickback, providing an additional layer of protection. An adjustable oil pump allows users to control the lubrication rate, optimizing the chainsaw's performance based on the type of work being performed.

The ergonomic design of the handles enhances grip and control, allowing for precision cutting. These chainsaws are user-friendly, catering to both experienced operators and those new to chainsaw work. Overall, the Husqvarna 346XP and 351 represent a perfect blend of power, technology, and comfort, making them reliable choices for professional and serious amateur users alike.
Top Page Image Contents