TECHNICAL DATA
| 346XP | 351 |
Engine | 2,7/45,0 | 3,0/49,4 |
Cylinder volume, cu.in/cm3 | ||
Cylinder bore, inch/mm | 1,65/42,0 | 1,73/44,0 |
Stroke, inch/mm | 1,28/32,5 | 1,28/32,5 |
Idle speed, rpm | 2 700 | 2 700 |
Recommended max. speed, unloaded, rpm | 14 200 | 12 500 |
Power, kW/ rpm | 2,5/ 9 600 | 2,3/ 9 000 |
Ignition system | FHP | FHP |
Manufacture | ||
Type of ignition system | CD | CD |
Spark plug | NGK BPMR 7A | NGK BPMR 7A |
| Champion RCJ 7Y | Champion RCJ 7Y |
Electrode gap, inch/mm | 0,020/0,5 | 0,020/0,5 |
Fuel and lubrication system | Walbro | Walbro |
Manufacturer | ||
Carburettor type | HDA 159A | HDA 159A |
Fuel capacity, US pint/litre | 1,06/0,5 | 1,06/0,5 |
Oil pump capacity at 8500 rpm, ml/min | ||
Oil capacity, US pint/litre | 0,59/0,28 | 0,59/0,28 |
Type of oil pump | Automatic | Automatic |
Weight | 346XP: 10,6/4,8 | 351:10,6/4,8 |
Without bar and chain, lbs/kg | ||
| 346XPG: 10,8/4,9 | 351G: 10,8/4,9 |
| 346XP | 351 |
Noise emissions | 346XPG | 351G |
|
| |
(see note 1) | 346XP: 113 | 112 |
Sound power level, measured dB(A) | ||
| 346XPG: 113 |
|
| 346XP |
|
| 346XPG |
|
Sound power level, guaranteed LWA dB(A) | 346XP: 114 | 113 |
| 346XPG: 114 |
|
| 346XP |
|
| 346XPG |
|
Sound levels |
|
|
(see note 2) |
|
|
Equivalent sound pressure level at |
|
|
operator’s ear, measured according to | 101 | 101,5 |
relevant international standards, dB(A) | ||
Vibration levels |
|
|
(see note 3) | 3,3 | 2,9 |
Front handle m/s2 | ||
Rear handle m/s2 | 3,4 | 3,6 |
Chain/bar | 13"/33 | 13"/33 |
Standard bar length, inches/cm | ||
Recommended bar lengths, inches/cm | ||
Usable cutting length, inches/cm | ||
Chain speed at max. power, m/sec | 18,5 | 17,3 |
Pitch, inch/mm | 0,325"/8,25 | 0,325"/8,25 |
Thickness of drive link, inch/mm | 0,050"/1,3 | 0,050"/1,3 |
| 0,058"/1,5 | 0,058"/1,5 |
Number of teeth on drive sprocket | 7 | 7 |
Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level, according to ISO 7182, is calculated as the
levels under various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.
Note 3: Equivalent vibration level, according to ISO 7505, is calculated as the
various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.
34´+H$J¶6q¨
– English