MAINTENANCE

Starter device

WARNING!

•When the recoil spring is assembled in the starter housing, it is in tensioned position and can when treated carelessly, pop out and cause injuries.

•Always be careful, when changing the recoil spring or the starter cord. Always wear safety goggles for eye protection.

Changing a broken or worn starter cord

•Loosen the screws, that hold the starter device

against the crankcase and remove the starter device.

•Pull out the cord approx. 30 cm and lift it up into the notch in the pulley. Zero-set

the recoil spring by letting the pulley rotate slowly backwards. Undo the screw in the centre of the pulley and remove the pulley.

•Insert and fasten a new starter cord in the pulley. Wind approx. 3 turns of the starter cord on to the pulley.

Assemble the starter pulley against the recoil spring, so the end of the spring engages to the pulley. Fit the screw in the centre of the pulley. Carry the starter cord through the hole in the starter housing and the starter handle. Make a knot on the starter cord.

Tensioning the recoil spring

•Lift the starter cord up in the notch on the starter pulley and turn the starter pulley 2 turns clockwise.

NOTE! Check that the starter pulley can be turned at least half a turn, when the starter cord is entirely pulled out.

Changing the broken recoil spring

•Lift the starter pulley (see "Changing a broken or worn

starter cord").

• Dissasemble the recoil spring by tapping the pully (with its inside facing down) lightly against a working bench or similar. If the spring pops out when assembling, it should be mounted again, out and in towards the centre.

•Lubricate the recoil spring with thin oil. Assemble the starter pulley, and tension the recoil spring.

Starter device assembly

•Assemble the starter device, by pulling the starter cord out first, then place the

starter against the crankcase. Then slowly release the starter cord so that the pulley engages with the pawls.

• Assemble and tighten the screws, which hold the starter.

30 – English

Page 29 Page 31
Page 30
Image 30
Husqvarna 346XP 351 manual Starter device, Changing a broken or worn starter cord, Tensioning the recoil spring
Page 29 Page 31

346XP 351 specifications

The Husqvarna 346XP and 351 chainsaws are celebrated models within the Husqvarna lineup, recognized for their excellence in performance, efficiency, and ease of use. Designed predominantly for professional use, these chainsaws incorporate advanced technology and ergonomic features that cater to the needs of tree care specialists, landscapers, and serious woodworkers.

One of the standout features of the Husqvarna 346XP is its lightweight design, which allows for easy maneuverability and reduced fatigue during extended use. Weighing around 10.8 pounds, the chainsaw is equipped with a powerful 50.1cc, 2.8 horsepower engine, delivering exceptional cutting performance while maintaining efficient fuel consumption. The model comes equipped with a 15 to 18-inch guide bar, providing versatility for various cutting tasks, from limbing to felling small trees.

The 351 model offers similar performance metrics but is designed slightly differently, featuring an improved air injection system for cleaner operation. This system actively collects debris before it reaches the air filter, extending the service intervals and enhancing engine life. The powerful 51.7cc engine on the 351 provides a higher power output compared to the 346XP, suited for even the most demanding cutting jobs.

Both chainsaws utilize Husqvarna’s X-Torq engine technology, which reduces fuel consumption by up to 20% while lowering emissions. This not only promotes environmental sustainability but also translates into cost savings for users. The LowVib technology integrated into both models minimizes vibrations, ensuring a more comfortable experience and reducing operator fatigue.

Enhanced safety features are also paramount in both chainsaws. The inertia-activated chain brake activates quickly in the event of a kickback, providing an additional layer of protection. An adjustable oil pump allows users to control the lubrication rate, optimizing the chainsaw's performance based on the type of work being performed.

The ergonomic design of the handles enhances grip and control, allowing for precision cutting. These chainsaws are user-friendly, catering to both experienced operators and those new to chainsaw work. Overall, the Husqvarna 346XP and 351 represent a perfect blend of power, technology, and comfort, making them reliable choices for professional and serious amateur users alike.
Top Page Image Contents