Husqvarna 4421-G/GX/GXL, 4421-D/DX/DXL owner manual General Information, Model Identification

General Information

1403

Figure 4 Dispose of Lead-acid Batteries Properly

GENERAL INFORMATION

This manual includes operating procedures, maintenance, and regular servicing information for all gasoline and diesel HUV 4421-G and HUV 4421-D vehicles. GXP and DXP models have been renamed GX and DX, respectively. All operating procedures, maintenance, and regular servicing are identical unless otherwise noted.

MODEL IDENTIFICATION

The serial number of each vehicle is printed on a bar code decal mounted either below the passenger side cup holder or above the accelerator or brake pedal (Example: PH0901-583947) (Figure 5).

The two letters (1) at the beginning of the serial number indicate the vehicle model. The following four digits (2) indicate the model year and production week during which the vehicle was built. The six digits (3) following the hyphen represent the unique sequential number assigned to each vehicle built within a given model year. See following NOTE.

NOTE: Have the vehicle serial number available when ordering parts or making inquiries.

A 17-digit Product Information Number (PIN) is included on this vehicle next to the serial number. This number may be used to register the vehicle where required.

Build Code: The build code (4) is a five-digit number that appears on the vehicle serial number decal. The build code exists to enable the user to identify the correct owner’s manual for a vehicle. This owner’s manual is valid for the build code range indicated on the back cover of this owner’s manual.

Page 14 HUV 4421 Owner’s Manual