Maintenance and Service Instructions
Engine Service and Maintenance
Follow the engine manufacturer’s maintenance instructions. Should any malfunction occur with the engine during the warranty period, take it to an Authorized Service Dealer. DO NOT tear down the engine, as this may void the Engine Manufacturer’s Warranty.
NOTE: Refer to engine manufacturer’s owner’s manual for all engine service information.
Caring For Vacuum Hoses
1.Inspect hoses before each use. If hoses have excessive wear, tears, or punctures, replace immediately.
2.To prolong the life of the hose, periodically rotate hose and turn hose end to end. Refer
to Preventative Maintenance Schedule in this manual.
3.Avoid twists and sharp turns in the hoses, as they will increase wear on the hoses.
4.Avoid dragging the lower hose along the sides of buildings or other hard surfaces.
Cleaning Exhaust Screen
To assist with “blowout” problems that will develop when air cannot exit the containers, the rubber flap bolted to the upper surface of the steel top insert (right rear corner) is designed to open if the top assembly is otherwise clogged.
If the rubber flap opens, it will release debris behind the vacuum system. While the containers will typically continue to fill, this is an indication that the top insert needs to be cleaned.
To clean the top insert:
1.Shut off all engines.
2.While wearing gloves, open the top, remove the containers, and reach in and up to wipe debris off the expanded metal openings inside the top assembly.
3.A household water hose can also be used to assist in the cleaning process, but the unit should be allowed to dry as the moisture may cause clogging to occur more quickly during operation.
15
