Husqvarna 80792 manual Adapter Bolt, line to go under the spool, 1 to, High Capacity, Parts List

7		8	PARTS LIST
	Line Saver		1 Adapter Bolt
	Slot

2 Outer Housing

Continue winding the line onto the	Thread the ends of the line into the
spool, keeping one finger between	eyelets in the housing. Do not allow
the lines. Lock the ends of each line	line to go under the spool.
segment into line saver slots in the
spool.
9	10

Replace the arbor bolt in the top of	Replace the cover. Tighten the lower
the trimmer head. Install the spacers	knob by turning counterclockwise.
as shown.	Pull the line ends free from the line
	saver slots.

11		12
	1" to 2"

Check for maximum line overlap of	Trim as required to final length.
one to two inches (four to five inches
of line extending from each eyelet).

		3		Eyelets
		4		Inner Spool
		5		Retaining Ring
		6		Outer Cover
		7		Spring
			8 Spring Housing
			9 Button/Knob
			10 Retainer Bolt
			11 Knob Tap
High Capacity
99909-007		99909-008
Item	Part No.		Item		Part No.
1	99909-217			1	99909-218
2	101061			2	101061
3*	106003			3*	106003
4	101030			4	101030
5	103025			5	103025
6	101053			6	101053
7	107006			7	107006
8	101054			8	101054
9	101074			9	101074
10	102082			10	102082
11	101072			11	101072

*2 required

11