Husqvarna 80792 manual Line to go under spool, Load Pro 99909-017 99909-018, 99909-028

7 8 PARTS LIST

With line saver slots facing away from	Lock the ends of the line in the line
you, wind the line clockwise on the	saver slots in the spool.
spool. Use a finger to keep the two
lines separate (spool shown is for
99909-017).
9	10

Thread the ends of the line into the	Replace the cover by aligning the
eyelets in the housing. Do not allow	tabs, then snap the cover in place.
line to go under spool.	Pull line free from the line saver slots.

11 12

1" to 2"

Check for a maximum line overlap of	Trim as required to final length.
one to two inches (four to five inches
of line extending from each eyelet).

1 Outer Housing

2 Adapter Bolt

3 Inner Spool

4 Outer Cover

5 Eyelets

6 Spring

7 Button/Knob

8 Retaining Ring

E-Z Load		E-Z Pro
99909-017		99909-018
Item	Part No.	Item	Part No.
1	101134	1	101134
2	102351	2	102350
3	101030	3	101030
4	101135	4	101135
5*	105115	5*	105115
6	107001	6	107001
7	101136	7	101136
8	101137	8	101137

99909-028		99909-020
Item	Part No.	Item	Part No.
1	101170	1	101170
2	102349	2	102350
3	101171	3	101171
4	101172	4	101172
5*	106007	5*	106007
6	107001	6	107001
7	101136	7	101136
8	101137	8	101137

*2 required

9