To Replace Mower Blade Drive Belt See Fig | Husqvarna 96045002201

SERVICE AND ADJUSTMENTS

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 35)

MOWER DRIVE BELT REMOVAL

•Park tractor on a level surface. Engage parking brake.

•Lower attachment lift lever to its lowest position.

•Disengage belt tension rod (K) from lock bracket (L).

CAUTION: Belt tension rod is spring loaded. Have a firm grip on rod and release slowly.

•Remove screws (P) from mandrel covers (Q) and remove covers.

•Removeanydirtorgrassclippingswhichmayhaveaccu- mulated around mandrels and entire upper deck surface.

•Remove belt from electric clutch pulley (M), both man- drel pulleys (R) and all idler pulleys (V).

MOWER DRIVE BELT INSTALLATION

•Install belt around all mandrel pulleys (R) and around idler pulleys (V) as shown.

•Install belt onto electric clutch pulley (M).

IMPORTANT: Check belt for proper routing in all mower pulley grooves.

•Reassemble mandrel covers (Q). Securely tighten all screws.

•Engage belt tension rod (K) on locking bracket (L).

CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and engage slowly.

•Raise attachment lift lever to highest position.

P
Q
	P
L	M
R	Q
K
V
R
	R

FIG. 35

22

Image 22

Husqvarna 96045002201 To Replace Mower Blade Drive Belt See Fig, Mower Drive Belt Removal, Mower Drive Belt Installation

Contents

YTH2348 General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope Operation III. Children ServiceGeneral Service IV. Towing Table of Contents Unassembled Parts AssemblyTools Required for Assembly To Remove Tractor from Carton Check for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake System Operation Know Your Tractor Reverse Operation System ROS on Position HOW to USE Your Tractor System Characteristics To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig To Operate Mower To Transport See Figs Service REMINDER/HOUR MeterReverse Operation System ROS To Operate on Hills ADD Gasoline Before Starting the EngineCheck Engine OIL Level To Start Engine See Fig Purge Transmission Mowing TipsRunning General Recommendations MaintenanceMaintenance Schedule Brake Operation BatteryTractor Tires Engine IN-LINE Fuel Filter See Fig CleaningDeck Washout Port See Fig To Remove Mower See Fig Service and AdjustmentsTo Install Mower and Drive Belt See Figs SET Parking Brake Lever and Lower AT- Tachment Lift See Fig Turn Steering Wheel Left and Position Mower See Fig ANTI-SWAY BAR SSlide Mower Under Tractor See Fig Attach Rear Lift Links C See Fig Install Belt on Engine Clutch Pulley M SeeAttach Mower Side Suspension Arms a to Chassis See Fig Attach Front Link E See Fig To Level Mower Turn nut right Turn nut left To raise mower To Replace Mower Blade Drive Belt See Fig Mower Drive Belt InstallationMower Drive Belt Removal Front Wheel TOE-IN/CAMBER To Replace Motion Drive Belt See FigTo Check Brake To Remove Wheel for Repairs See Fig Weak or Dead Fully Charged Battery To Start Engine with a Weak Battery See FigReplacing Battery See Fig To Replace Headlight Bulb To Adjust Choke Control To Remove Hood and Grill Assembly See FigTo Adjust Throttle Control Cable To Adjust Carburetor Fuel System StorageOther Engine OIL Problem Cause Correction Fires when turn To run when operBattery will not Engine continues Schematic Tractor Model NO. YTH2348 96045002201, Product no 45 Electrical KEY Part Description Chassis Chassis 204 532 41 Vent Top Hood Drive 197 196 Tractor Model NO. YTH2348 96045002201, Product no 45 Spark Arrester KIT Engine Engine Power Rating Information KEY Part NO. NO. Description Steering Assembly 532 41 Wheel, Steering 532 19 Mower Deck KEY Part NO. NO. Description Mower Lift Seat Assembly Decals Wheels and Tires Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX Service Notes Service Notes Warranty Statement