MAINTENANCE
Replacing the blade units
WARNING
Always use original blade units when replacing.
Only replacing the blade and reusing the screw and washer, can result in the screw wearing during mowing and shearing off. The blade can then be thrown causing serious injury.
There are three blade units on the blade disc. Each unit consists of a screw, a blade and a lock washer.
Always replace all three blade units at the same time, to obtain a balanced mowing system.
1.Set the main switch to the OFF position.
2.Wear protective gloves.
3.Turn the Auto Mower upside down.
4.Rotate the skid plate so that its holes align over the blade unit screws.
5.Unscrew the blade unit.
Use a straight slot or
6.Pry apart the skid plate and blade disc a little and remove the blade unit.
7.Fit the new balde unit.
OFF
