Husqvarna Auto Mower manual B. Planning the installation, Installation, Charging station

Models: Auto Mower

1 51
Download 51 pages 37.85 Kb
Page 14
Image 14
B. Planning the installation

INSTALLATION

B. Planning the installation

Charging station

First and foremost the charging station should be posi- tioned:

Centrally in the main area, along the outer edge and with a large free area in front of the station.

3012-233

In the shadow. The battery is spared if it charged in the low possible ambient temperature.

On relatively level ground. The height difference must not differ more than 10 cm between the front and rear of the charging station.

Max 10 cm

Max 10 cm

3012-296

Close to a wall socket:

The charging station should be connected to a 230 V wall socket via the low voltage cable and transformer.

The supplied low voltage cable is 20 metres long.

IMPORTANT INFORMATION

The length of the low voltage cable must not be changed.

3012-220

3012-223

The transformer must be placed where it is well ventilated and is not exposed to direct sunlight. It is also beneficial if the transformer can be placed under a roof.

It is recommended to use an earth fault-breaker when connecting the transformer to the wall socket.

English-15

Page 14
Image 14
Husqvarna Auto Mower manual B. Planning the installation, Installation, Charging station, Important Information