PRESENTATION
Presentation
Congratulations on your choice of an exceptionally high quality product.
To get the best from your Auto Mower requires knowl- edge of its function. This chapter contains information you should be aware of when planning the installation.
Installation of the Husqvarna Auto Mower includes four main components:
Auto Mower, an automatic lawn mower that mows the lawn by moving in essentially an irregular pattern. The mower is powered by a maintenance free battery
Charging station, where your Auto Mower returns when the charge level in the battery becomes too low.
The charging station has three functions:
•To send control signals along the boundary wire.
•To send out signals so the Auto Mower finds the charging station.
•To charge the Auto Mower battery.
Transformer, which is connected between the charg- ing station and a 230 V wall socket. The transformer is connected to the wall socket via an integrated power cord and to the charging station via a 20 m long low voltage cable. The length of the low voltage cable must not be changed.
Boundary wire, laid in a loop around the Auto Mower’s working area. The wire is laid around the edges of the lawn and around objects and plants that the mower must not run into.
The length of boundary wire needed in an installation is the circumference of the working area plus a few extra metres to lay around ”islands”, objects and plants. A few extra metres are also required for any subsequent adjustments. The boundary wire supplied for the installation is 250 m long. If this is not sufficient more wire can be purchased, with a connector, and spliced onto the existing wire.
