Husqvarna Auto Mower manual Shortcuts, Program, Control Panel

CONTROL PANEL

Shortcuts

1.Home:

•Sends the mower to the charging station. Where it stays until the button is pressed again.

The house icon is lit on the right-hand side of the display when the button is pressed.

•Move the cursor in the menu structure back to the main page.

2.Operating mode:

The selected operating mode is shown on the right-hand side of the display as AUTO respective MAN.

Press the button to choose between:

•AUTO, the normal automatic operating mode where Auto Mower mows and charges continu- ously.

•MAN. If you select MAN and close the control panel cover when the Auto Mower is on the lawn, it will mow until the battery is discharged. It will then stop and show the message ”Battery empty”. The mower must then be moved manu- ally to the charging station and then started manually after charging.

If you select MAN and close the control panel cover when the Auto Mower is in the charging station the mower will charge completely, reverse 20 centimetres and stop.

Program

3.A

4.B

5.C

Under the program buttons you can save sets of differ- ent settings, to reuse or to simplify the use of an Auto Mower in several gardens. Under respective buttons are some preset settings. You can choose to use these or change them.

•To change settings: Make the required settings. Save by holding down the selected button for 2 sec- onds, until two beeps are heard close together. If, for example, button A is pressed the message ”Pro- gram A changed” will be shown for 2 seconds on the display.

•Use the saved information by quickly pressing the required button.

If, for example, button A is pressed the question

”Use program A?” will appear on the display. If YES is pressed, the message ”Program A selected” will be shown for 2 seconds on the display. The letter ”A” is then shown on the right-hand side of the dis- play to indicate which program is selected.

1

2

3012-240

3

4

5

3012-241

English-27