Husqvarna C342B Assembly, Before You Start To Assemble The Grass Catcher, Parts Identification

Models: C342B

1 19
Download 19 pages 20.75 Kb
Page 6
Image 6
ASSEMBLY

ASSEMBLY

BEFORE YOU START TO ASSEMBLE THE GRASS CATCHER

Some tractor models may need minor modifications before you can mount the grass catcher to the tractor. Look carefully at the drawbar on your tractor and compare to the illustrations below. If your drawbar looks like STYLE "A" (has the upper corner ribs), your tractor is ready - proceed with the grass catcher assembly.

If your drawbar looks like STYLE "B" (does not have the upper corner ribs), go to the PREPARATION section in this manual.

TRACTORDRAWBAR

STYLE "A"

UPPER

CORNER

RIBS

TRACTORDRAWBAR

STYLE "B"

PARTS IDENTIFICATION

COVER

WAR

NING

 

UPPER CHUTE

DUMP

BAG

INDICATOR

CHUTE LATCH

WAR

NING

 

LOWER CHUTE

 

 

RNIN

G

 

WA

 

 

 

 

 

 

 

LOWER CHUTE

GRASS

 

 

ATTACHING

 

 

STRAPS

CATCHER

 

 

CONTAINERS

 

 

 

NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the tractor, in the operator's position.

THESE ARE THE TOOLS YOU WILL NEED TO ASSEMBLE YOUR GRASS CATCHER:

(1) 3/8" Wrench

(1) Drive Ratchet

(1) 1/2" Wrench

(1) 3" or longer Extension

(2) 9/16" Wrenches

(1) Short Handle

(1) 1/2" Socket

Phillips Screwdriver

CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:

Depress clutch/brake pedal fully and set parking brake.

Place gearshift/motion control lever in "NEUTRAL" position.

Place attachment clutch in "DISENGAGED" position.

Turn ignition key "OFF" and remove key.

Make sure the blade and all moving parts have completely stopped.

Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

6

Page 6
Image 6
Husqvarna C342B owner manual Assembly, Before You Start To Assemble The Grass Catcher, Parts Identification