5

PURGE TRANSMISSION

To ensure proper operation and performance, it is recom- mended that the transmission be purged before operating tractor for the first time. This procedure will remove any trapped air inside the transmission which may have developed during shipping of your tractor.

IMPORTANT: SHOULD YOUR TRANSMISSION REQUIRE REMOVAL FOR SERVICE OR REPLACEMENT, IT SHOULD BE PURGED AFTER REIN STALLATION BEFORE OPER- ATING THE TRACTOR.

Park tractor on level surface so it will not roll in any direc- tion. Parking brake must be disengaged for the following procedure.

Disengage transmission by placing freewheel control in freewheeling position.

Start engine and move throttle control to slow position. Be sure parking brake is not engaged.

Depress forward drive pedal to full forward position, hold for five (5) seconds and release pedal. Depress reverse drive pedal to full reverse position, hold for five (5) seconds and release pedal. Repeat this procedure three (3) times.

Stop tractor by turning ignition key to "OFF" position.

Engage transmission by placing freewheel control in driving position.

Start engine and move throttle control to slow position.

Drive tractor forward for approximately five feet then backwards for five feet. Repeat this driving procedure three times.

Your tractor is now ready for normal operation.

ENTLÜFTEN DES GETRIEBES

Um vorschriftsmäßigen Betrieb und einwandfreie Leistungs- fähigkeit des Getriebes zu gewährleisten, sollte dieses vor der ersten Inbetriebnahme des Traktors entlüftet werden. Auf diese Weise wird sichergestellt, daß sämtliche Luftblasen, die sich während des Transports des Traktors im Getriebe gebildet haben könnten, entfernt werden.

WICHTIG: FALLS DAS GETRIEBE FÜR ETWAIGE WAR- TUNGSARBEITEN ODER ZUM ERSATZ AUSGEBAUT WERDEN MUSS, SOLLTE ES NACH DEM WIEDEREINBAU IM TRAKTOR ENTLÜFTET WERDEN, BEVOR DIESER IN BETRIEB GENOMMEN WIRD.

Den Traktor auf ebenem Boden abstellen und sicherstellen, daß er nicht ins Rollen kommen kann. Für diesen Vorgang kann die Feststellbremse nicht eingelegt werden.

Das Getriebe auskuppeln, indem die Freilauf-Schaltung auf Freilauf geschaltet wird.

Den Motor anlassen und die Gasbedienung auf langsamen Leerlauf stellen. Sicherstellen, daß die Feststellbremse nicht eingelegt ist.

Das Pedal für den Vorwärtsantrieb in die Position ganz vorwärts drücken, fünf (5) Sekunden lang in dieser Position halten und dann loslassen. Das Pedal für den Rückwärtsantrieb in die Position ganz rückwärts drücken, fünf (5) Sekunden lang in dieser Position halten und dann loslassen. Diesen Schritt drei (3) Mal wiederholen.

Den Traktor abstellen, indem der Zündschlüssel in die “AUS” (OFF) Stellung gedreht wird.

Die Freilauf-Schaltung in die Fahrtstellung rücken, um das Getriebe einzukuppeln.

Den Motor anlassen und die Gasbedienung auf langsamen Leerlauf stellen.

Den Traktor etwa 1,50 m (5 ft) weit nach vorne fahren und dann um etwa 1,50 m (5 ft) zurücksetzen. Dieses Verfahren dreimal wiederholen.

Der Traktor ist jetzt normal betriebsbereit.

PURGE DE LA TRANSMISSION

Pour assurer un fonctionnement et un rendement corrects, il est recommandé de purger la transmission avant d'utiliser le tracteur pour la première fois. Cette opération supprimera l'air emprisonné à l'intérieur de la transmission pendant le transport du tracteur.

ATTENTION! SI LA TRANSMISSION A ETE DEPOSE POUR SON ENTRETIEN OU SON REMPLACEMENT, ELLE DEVRA ETRE PURGEE APRES SON REMONTAGE ET AVANT REUTILISATION DU TRACTEUR.

Placer le tracteur sur une surface plane afin qu'il ne puisse pas rouler dans aucune direction. Le frein de stationnement doit être desserré pour effectuer les opérations suivantes.

Débrayer la transmission en plaçant la commande de roue libre sur sa position de marche en roue libre (Se référer à la section "TRANSPORT" de ce livret).

Démarrer le moteur et mettre la commande des gaz en position de ralenti. S'assurer que le frein de stationnement n'est pas serré.

Déplacer à fond le levier de commande d'avancement en position de marche avant et le maintenir ainsi pendant 5 secondes. Déplacer ensuite à fond le levier en position de marche arrière et le maintenir ainsi pendant 5 secondes. Répéter ces opérations 3 fois de suite.

Arrêter le moteur du tracteur en amenant la clé de contact sur sa position d'arrêt (OFF).

Embrayer à nouveau la transmission en replaçant la commande de roue libre dans sa position "embrayée" (Voir section "TRANSPORT de ce manuel).

Redémarrer le moteur et placer la commande des gaz en position de ralenti.

Faire avancer le tracteur de 1 à 2 mètres en marche avant, puis de la même distance en marche arière. Répéter cette opération 3 fois de suite.

Le tracteur est maintenant prêt pour une utilisation normale.

PURGAR LA TRANSMISIÓN

Para asegurar la operación y ejecución adecuada, es reco- mendado que la transmisión sea purgada antes de operar el tractor para la primera vez. Este proceso removerá cualquier aire adentro de la transmisión que se halla formado durante el transporte de su tractor.

IMPORTANTE: SI POR ACASO SU TRANSMISIÓN DEBE SER REMOVIDA PARA SERVICIO O REEMPLAZO, DEBE SER PURGADA DESPUÉS DE LA REINSTALACION Y ANTES DE OPERAR EL TRACTOR.

Estacione el tractor con seguridad sobre una superficie nivelada para que no ruede en ninguna dirección. El freno de estacionamiento debe estar desenganchado para el procedimiento siguiente.

Desenganche la transmisión poniendo el control de rueda libre en la posición de rueda libre (Vea “PARA EL TRANSPORTE” en esta sección de este manual).

Arranque el motor y mueva el control de la aceleración a la posición de lento. Asegúrese que el freno de esta- cionamiento no este enganchado.

Apretar el pedal de marcha adelante hasta el fondo, man- tener por cinco (5) segundos y soltar el pedal. Apretar el pedal de marcha atrás hasta el fondo, mantener por cinco

(5) segundos y soltar el pedal. Repetir el procedimiento tres (3) veces.

Pare el tractor girando la llave de encendido a la posición de apagado “OFF”.

Enganche la transmisión poniendo el control de rueda libre en la posición de conducir (Vea “PARA EL TRANS- PORTE” en esta sección de este manual ).

Arranque el motor y mueva el control de la aceleración a la posición de lento.

Conduzca su tractor hacia adelante durante aproxima- damente cinco pies y entonces hacia marcha atrás cinco pies (150 cm). Repita este proceso tres (3) veces.

Su tractor esta ahora dispuesto para la operación normal.

54

Page 54
Image 54
Husqvarna CTH126 Purge Transmission, Entlüften DES Getriebes, Purge DE LA Transmission, Purgar LA Transmisión

CTH126 specifications

The Husqvarna CTH126 is a highly regarded ride-on lawn mower designed for homeowners who require efficiency, comfort, and reliability in their mowing tasks. This powerful machine combines innovative features with a user-friendly design, making it an excellent choice for maintaining medium to large-sized lawns.

One of the standout characteristics of the CTH126 is its robust engine. Powered by a reliable and efficient 540cc Briggs & Stratton gasoline engine, it delivers ample torque and power, ensuring that the mower can handle tough grass and varied terrains. The engine's design enhances fuel efficiency and reduces emissions, making it an environmentally friendly option for lawn care.

The cutting deck of the Husqvarna CTH126 is another notable feature. With a 42-inch cutting width, it allows for faster mowing sessions, covering larger areas in less time. The deck is made from durable materials to withstand the rigors of frequent use, and it includes a cutting height adjustment feature, allowing users to easily change the height of the cut from 1.5 to 4 inches, ensuring optimal results for various lawn types and conditions.

One of the technologies that sets the CTH126 apart is its ergonomic seating and controls. The riding mower is designed with comfort in mind, featuring an adjustable seat that accommodates operators of different sizes. The intuitive dashboard layout includes easy-to-reach controls for throttle, choke, and blade engagement, allowing users to focus on mowing without distraction.

Moreover, the Husqvarna CTH126 is equipped with a tight turning radius, enhancing its maneuverability. This feature allows the mower to navigate obstacles such as flower beds and trees effortlessly, making it easier to achieve a clean and well-manicured lawn. The mower's front suspension system further contributes to a smooth ride, reducing operator fatigue during longer mowing sessions.

In terms of maintenance, the Husqvarna CTH126 is designed for ease of access, making routine checks and service hassle-free. With features like a removable deck for cleaning and a built-in battery charger, owners can keep their mower in top shape with minimal effort.

Overall, the Husqvarna CTH126 combines powerful performance, user-friendly design, and innovative technologies to provide an exceptional lawn mowing experience, making it a solid investment for homeowners dedicated to maintaining pristine outdoor spaces.