CONTROLS

8. Hour Meter

The hour meter displays the total operating time.

It will flash CHG OIL (Change Oil) at 50 hour intervals. The flash duration is one hour before and one hour after the interval. The CHG OIL icon will come on and shut off automatically. The hour meter can not be manually reset.

Hour meter

9. Choke Control

The choke control is used for cold starts in order to provide the engine with a richer fuel mixture.

For cold starts the control should be pulled out.

Chokecontrol

10. Ignition Switch

The ignition key is placed on the control panel and is used to start and stop the engine.

IMPORTANT INFORMATION

 

Do not run the starter for more than five

 

seconds each time. If the engine does not

 

start, wait about 10 seconds before

 

retrying.

Ignition switch

8011-759

8011-756

8011-758

English-23

Page 22
Image 22
Husqvarna EZ4822, EZ6124, EZ5226, EZ4621, EZ4220 manual Hour Meter, Choke Control, Ignition Switch