OPERATION

To start an engine with a weak battery

 

WARNING!

 

Lead-acid batteries generate

 

explosive gases. Keep sparks,

 

flame and smoking materials

 

away from batteries. Always

 

wear eye protection then around

 

batteries.

 

If your battery is too weak to start the engine, it should

 

be recharged. (See “Battery” in the Maintenance

 

Section.)

 

IMPORTANT INFORMATION

 

Your mower is equipped with a 12-volt

 

negative grounded system. The other

 

vehicle must also be a 12-volt negative

 

grounded system. Do not use your mower

 

to start other vehicles.

 

If “jumper cables” are used for emergency starting,

 

follow this procedure:

8011-642

To attach jumper cables

Jumper cable connection

 

Connect each end of the RED cable to the POSITIVE (+) terminal on each battery, taking care not to short against chassis.

Connect one end of the BLACK cable to the NEGATIVE (-) terminal of the fully charged battery.

Connect the other end of the BLACK cable to a good CHASSIS GROUND on the mower with the discharged battery, away from the fuel tank and battery.

To remove cables, reverse order

Remove BLACK cable first from chassis and then from the fully charged battery.

Remove RED cable last from both batteries.

English-31

Page 30
Image 30
Husqvarna EZ6124, EZ5226 To start an engine with a weak battery, To attach jumper cables, To remove cables, reverse order