OPERATION

Moving by Hand

WARNING!

No adjustments or maintenance to be carried out unless:

the engine stopped

the ignition key removed

the parking brake activated

When pushing or pulling the mower, be sure to engage the IZT (Integrated Zeroturn Transaxle) bypass linkages. The IZT bypass linkages are located on the rear of the frame, below the rear engine guard.

Always turn off engine before engaging or disengaging the hydro release. Never attempt to adjust the bypass linkages with the engine running.

Raise the deck into the highest cutting position.

Pull the IZT bypass linkages out and into the slots and release so that it is held in the bypass position.

To reengage the IZT’s to drive, reverse the above procedure.

CZ10-2

1. IZT Bypass linkage

Bypasslinkages

1

2

1. Head outside of rear deck

1. IZT Bypass linkage

Bypasslinkages

CZ12

English-36

Page 35
Image 35
Husqvarna EZ6124, EZ5226, EZ4822, EZ4621, EZ4220 manual Moving by Hand