CONTROLS
Controls
This operator’s manual describes the Husqvarna Zero Turn Rider. The rider is fitted with either a Briggs & Stratton or Kohler
Transmission from the engine is made via two belt- driven hydraulic pumps, which in turn drive a hydraulic motor for each drive wheel. Using the left and right steering controls, the flow is regulated and thereby the direction and speed.
Zero Turn Rider
Control Locations
|
|
|
|
| |
|
| Page |
|
| Page |
1. | Parking brake | 17 | 7. | Fuses | 20 |
2. | Motion control levers | 16 | 8. | Hour meter | 21 |
3. | Fuel shut off valve | 18 | 9. | Choke control | 21 |
4. | Seat adjustment bolts | 18 | 10. | Ignition switch | 21 |
5. | Fuel tank cap | 19 | 11. | Throttle control | 22 |
6. | By pass linkage | 19 | 12. | Blade switch | 22 |
|
|
| 13. | Cutting height pedal | 23 |
