Husqvarna EZ4220, EZ6124, EZ5226, EZ4822 Drain old oil filters of all free flowing oil prior to

LUBRICATION

7.	Drain old oil filters of all free flowing oil prior to
	disposal. Place used oil in appropriate containers
	and dispose of it in accordance with laws in your
	area.
8.	Remove the top port plug (see illustration) from the
	left side and right side of the transaxles prior to

2

1

filling with oil. This will allow the transaxles to vent

during oil fill.

9. Remove the cap from the transaxles’ expansion

tank located on the vehicle frame.

10. Fill with 20W50 motor oil until oil just appears at the

bottom of each transaxles’ top port (approximately

2 quarts per transaxle, 4 quarts total). Install the top

port lug into each transaxle as the oil level reaches

3

4

this port.

11. Install and torque the top port plugs to 180 in./lbs.

1. Filter

8019-010

12. Continue to fill the transaxles through the

expansion tank until the “Full Cold” line is reached

(this will take approximately 23 additional ounces).

13. Re-install the expansion tank cap by hand. Be

careful to not overtighten.

14. Proceed to the purge procedure.

2. Top Port Plug

3. Filter Guard

4. Screws Changing the oil filter

2 1

3

1. Expansion Tank	8019-012
2. Cap
3. Transaxles

Expansion Tank

English-60