Husqvarna EZ4822, EZ6124 To replace IZT Integraded Zeroturn Transaxle belt, IZT belt removal

MAINTENANCE

IZT belt

To replace IZT (Integraded Zeroturn Transaxle) belt

Park the mower on a level surface. Engage the park brake.

IZT belt removal

NOTE: Be careful not to damage the fan blades on the IZT as this can affect cooling or damage the IZT

•Remove the deck belt (see to replace deck belt in this section of the manual).

•Create slack in the belt by either removing the spring on the pump idler arm or inserting 1/2" breaker bar into the square hole on the spring loaded idler. Rotate arm to release belt tension.

•The belt should now be able to be removed from the engine pulley and IZT pulleys.

Belt installation

•Wrap the IZT belt around the IZT pulleys.

•Route the belt around the inside of the idler pulley.

•Now you can wrap the belt around the engine pulley.

•Reattach the spring on the pump idler arm if previously disconnected.

•Reinstall the deck belt onto the electric clutch pulley (see to replace deck belt in this section of the manual).

4	3
1	2
5
	8058-008

1.Spring loaded idler pulley

2.Fixed idler pulley

3.Electric clutch

4.IZT belt

5.Deck belt

IZT belt

		3
		4
5	1	2	6

7

8058-009

1.Spring loaded idler pulley

2.Fixed idler pulley

3.Engine

4.IZT belt

5.Left drive pulley

6.Right drive pulley

7.Square hole

IZT belt routing

English-48