This symbol indicates that the machine is in conformance with the applicable European directive.
INDICATION
MANDATORYINFORMATION INSTRUCTION
WARNINGPROHIBITION
These signs give advice concerning your safety
Instruction plate
|
| MANUFACTURER |
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
TYPE | TYPE |
|
|
|
| N° SERIE |
|
|
|
| SERIAL |
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
| ANNEE DE |
|
|
|
| FABRICATION |
WEIGHT |
|
|
|
|
| FABRICATION |
|
|
|
| YEAR |
|
|
|
|
|
|
|
|
| |||
MASSE UTILE |
| Kg | PUISSANCE |
| kW | POWER | |||||
MAXI TOOL | Ø MAXI OUTIL. |
| mm | PLAGE DE |
|
| V | VOLTAGE | |||
| TENSION |
|
| ||||||||
BORE | Ø ALESAGE |
| mm | FREQUENCE |
| Hz | FREQUENCY | ||||
|
| ||||||||||
SPEED | T/MN - RPM |
|
|
| INT. UTIL. |
|
| A | INTENSITY | ||
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
SPECIAL INSTRUCTIONS
The disc cutter is designed to provide safe and reliable service in operating conditions corresponding with the instructions, but it can present dangers for the user and risks of damage, consequently regular on site inspection is necessary to ensure :
•Perfect technical condition (use for the purpose for which it is intended and taking into account any risks, and correction of any malfunction detrimental to safety).
•Use a diamond disk for cutting with water (sawing new or old concrete, tarmac or asphalt). No other type of disk is allowed (abrasive, saw, etc...).
•Competent staff (qualifications, age, training) who have read and understood the manual in detail before starting work: any electrical, mechanical or other problem should be investigated by a qualified maintenance engineer (electrician, maintenance manager, approved dealer, etc . . .).
•That the warnings and instructions marked on the machine are followed (adequate personal protection, correct use, general safety instructions, etc).
•That no modification, transformation or addition is detrimental to safety and that it is carried out without prior authorization from the manufacturer.
•Respect of the maintenance intervals and periodical checks recommended.
•That only genuine spare parts are used for repairs.
FAILURE TO COMPLY WITH THESE WARNINGS COULD RESULT IN DEATH OR SERIOUS BODILY INJURY.
| DO |
|
| |
DO | carefully read and understand all the | |||
| instructions before operating the saw. | |||
DO | always keep all guards in place. |
| ||
DO | aways wear safety approved hearing, | |||
| eye, head and respiratory protection. | |||
DO | keep all parts of your body away from | |||
| the blade and all other moving parts. | |||
DO | know how to stop the saw quickly in | |||
| case of an emergency. |
|
| |
DO | shut off the engine and allow it to cool | |||
| before refueling. |
|
| |
DO | inspect the blade, flanges and shafts | |||
| for damage before installing the | |||
| blade. |
|
|
|
DO | use only blades marked with a | |||
| maximum operating speed greater | |||
| than the blade shaft speed. |
| ||
DO use caution | and | follow | the | |
| instructions | when | loading | and |
| unloading the saw. |
|
|
| DO NOT |
DO NOT | allow other persons to be near |
| the saw when starting, refueling |
| or when cutting. |
DO NOT | operate gasoline engines in an |
| enclosed area unless it is |
| properly vented. |
DO NOT | use damaged equipment or |
| blades. |
DO NOT | operate the saw in areas of |
| combustible material. Sparks |
| from the saw could cause a fire |
| or an explosion. |
DO NOT | allow blade exposure from the |
| guard to be over 180 degrees. |
DO NOT | leave the saw unattended with |
| the motor running. |
DO NOT | operate the saw while under the |
| influence of drugs or alcohol. |
1 Use
•Utilisation : sawing with sprinkling of fresh, old or coated (asphalt) concrete.
•Tools :
(Details from your usual supplier).
3 Description of the machine [FIG. 1]
11. Handle
12. Motor stop
13. Lowering handwheel
14. Graduated scale
15. Engine
16. Engine oil drain
17. Front guide
18. Belt cover
19. Disk casing
10.Service spanner
11.Water intake tap
12.Tank (17 litres)
4 Handling - Transport
Switch off the disk prior to moving the machine on jobsite.
Remove the disk prior to hoisting, loading, unloading and transporting the machine on jobsite.
Height of adjustable handlebars (unscrew the lever (M))
[SEE FIG. 2].
•The
•The handwheel (K) locks the machine itself in the high position.
•Light weight, compact, transportable in a vehicle by one person.
English
10