ASSEMBLY
|
|
|
| FRONT |
| DOUBLE LOOP |
|
| SUSPENSION |
CHASSIS | SUSPENSION ARMS |
| BRACKETS | |
RETAINER SPRING |
|
|
| |
BRACKET | (Inward pointing deck pins) | FRONT |
| ELECTRIC |
|
| |||
|
|
| CLUTCH | |
|
| MOWER | FRONT | |
|
| PULLEY | ||
|
| BRACKET | LINK |
|
GAUGE
WHEEL
SINGLE LOOP
RETAINER
SPRINGS
DOUBLE
LOOP
RETAINER
SPRINGBAR
USE PLIERS FOR
RETAINER SPRINGS
DEFLECTOR
SHIELD
IDLER
PULLEY
LOOP DOWN
FIG. 6
CHECKLIST
BEFORE YOU OPERATE!AND ENJOY YOUR NEW TRAC- TOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.
PLEASE REVIEW THE FOLLOWING CHECKLIST: All assembly instructions have been completed. No remaining loose parts in carton.
Battery is properly prepared and charged. (Minimum 1 hour at 6 amps).
Seat is adjusted comfortably and tightened securely.
All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).
Be sure mower deck is properly leveled
Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.
Check wiring. See that all connections are still secure
!and wires are properly clamped.
Before driving tractor, be sure freewheel control is in drive position.
WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:
Engine oil is at proper level.
Fuel tank is filled with fresh, clean, regular unleaded gasoline.
Become familiar with all controls - their location and function. Operate them before you start the engine.
Be sure brake system is in safe operating condition.
!It is important to purge the transmission before operating your tractor for the first time. Follow proper starting and transmission purging instructions (See “TO START ENGINE” and “PURGE TRANSMISSION” in the Opera- tion section of this manual).
9
