Husqvarna GTH2350 Service And Adjustments, TO REMOVE MOWER See Fig, To Level Mower Housing

Models: GTH2350

1 48
Download 48 pages 40 Kb
Page 20
Image 20
SERVICE AND ADJUSTMENTS

SERVICE AND ADJUSTMENTS

CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

Depress brake pedal fully and set parking brake.

Place attachment clutch in “DISENGAGED” position.

Turn ignition key “OFF” and remove key.

Make sure the blades and all moving parts have completely stopped.

Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER (See Fig. 17)

Place attachment clutch in “DISENGAGED” position.

If equipped, turn height adjustment knob to lowest setting.

Lower mower to its lowest position.

Remove retainer spring holding anti-swaybar to chassis bracket and disengage anti-swaybar from bracket.

Remove four retainer springs from front plate assembly and remove plate.

Remove retainer springs from suspension arms at deck and disengage arms from deck.

Raise attachment lift to its highest position.

Slide mower forward and remove belt from electric clutch pulley.

Slide mower out from under right side of tractor.

TO LEVEL MOWER HOUSING

Adjust the mower while tractor is parked on level ground or driveway. Make sure tires are properly inflated (See “PROD- UCT SPECIFICATIONS” section of this manual). If tires are over or underinflated, you will not properly adjust your mower.

SIDE-TO-SIDE ADJUSTMENT (See Figs. 17 and 18)

Raise mower to its highest position.

Measure height from bottom of deck curl to ground level at front corners of mower. Distance “A” on both sides of mower should be the same.

If adjustment is necessary, make adjustment on one side of mower only.

To raise one side of mower, tighten lift link adjustment nut on that side.

To lower one side of mower, loosen lift link adjustment nut on that side.

TO INSTALL MOWER

Follow procedure described in “INSTALL MOWER AND DRIVE BELT” in the Assembly section of this manual.

BOTTOM

 

BOTTOM

EDGE OF

 

 

EDGE OF

MOWER TO

 

 

MOWER TO

GROUND

 

 

GROUND

 

 

A

GROUND LINE

A

FIG. 18

SUSPENSION

ADJUSTMENT

LIFT

ELECTRIC

ARMS

NUTS

LINKS

CLUTCH

 

 

 

PULLEY

 

FRONT MOWER

 

 

BRACKET

FRONT

 

 

 

 

PLATE

CHASSIS

 

ASSMEBLY

BRACKET

 

 

 

 

RETAINER

 

 

SPRINGS

RETAINER

 

FRONT

 

MOWER

SPRING

 

BRACKET

 

 

 

ANTI-SWAY

 

 

BAR

 

 

RETAINER

 

 

SPRINGS

 

FIG. 17

20

Page 20
Image 20
Husqvarna GTH2350 Service And Adjustments, TO REMOVE MOWER See Fig, To Level Mower Housing, To Install Mower, Tractor