Husqvarna HUV 4414 Gearcase Lubrication, Rear transaxle, Page, Rear Transaxle Drain Plug

Gearcase Lubrication

Rear transaxle:

Clean and install the drain plug (2) and washer before filling the rear transaxle with new lubricant (Figure 23). Tighten the drain plug to 8 ft-lb (10.8 N·m). Remove the fill plug/dipstick (2) (Figure 25). Use a funnel and tube to fill the transaxle through the fill plug/dipstick hole (1) located on the top of the rear transaxle (Figure 24). See Periodic Lubrication Schedule on page 33. Replace rear transaxle dipstick and tighten to 35 in-lb (4 N·m).

2	1
808	819

Figure 23 Rear Transaxle Drain Plug Figure 24 Rear Transaxle Check/Fill Plug

2

	1. Full Level 2. Safe Level 3. Low Level
820	824
Figure 25 Rear Transaxle Dipstick	Figure 26 Rear Transaxle Lubricant Level Check

2009 HUV 4214, HUV 4414, andHUV 4414-XP Owner’s Manual Page 41