SAFETY REGULATIONS
Use
•Read through the Operator’s Manual carefully and make sure you understand its contents before using the Auto Mower.
•Check that there are no
stones, twigs, tools, toys or other objects on the lawn that can damage the blades or cause the mower to stop.
•Start the Auto Mower in accordance with the instructions. Keep your hands and feet away from the rotating blades. Never put your hands or feet underneath the mower.
•Make sure that no one is standing in front of the Auto Mower when you start it.
•Never lift up the Auto Mower or carry it around when it is running.
•Do not allow anyone who does not know how the Auto Mower works and behaves, especially children, to go into the working area while it is mowing.
•Do not let persons who do not know how the Auto Mower works and behaves use the mower.
•Do not put anything on top of the Auto Mower or its charging station.
•Do not allow the Auto Mower to be used if any part is seen to be defective or faulty. This includes the cutting disc, blades, nuts, bolts and cables.
•Do not use the Auto Mower if the power switch does not work.
•Always switch off the Auto Mower by means of the power switch when it is not in use.
Transport
STOP
!WARNING!
Never move the Auto Mower with the cover lowered. The blades can then rotate and cause personal injury.
Moving the Auto Mower from or within the mowing area:
1.Lift the cover. The long beep after the cover has been lifted indicates that the cutting disc has stopped.
2.Enter the first digit of your personal code to prevent the theft alarm being activated.
3.Switch off the power switch if the Auto Mower is to be moved outside of the mowing area. Otherwise this does not need to be switched off.
4.Carry the Auto Mower by its handle.
Pack away the Auto Mower in the original packaging when transporting over long distances.
Care
STOP |
•Inspect the Auto Mower weekly and replace any damaged parts. Check in particular that the cutting disc and blades are not damaged. Change all the blades at the same time if replacement is necessary so that the rotating parts are balanced, see the “Maintenance” section.
•Clean the charging station’s contact plates and the Auto Mower’s charging pins using a fine abrasive cloth if necessary. If black oxide forms on the Auto Mower’s charging pins this can be a sign of inferior electrical contact between the charging pins and the charging station’s contact plates. Check the installation of the charging station, refer to “Instal- lation, step by step”. Always check whether cleaning is necessary with the first usage after the winter break.
•Contact your local dealer when changing damaged or worn parts.
•Old batteries that have been replaced should be returned for disposal to your dealer or to a recycling station.
!WARNING!
The power switch must be switched off with all work on the mower’s chassis such as cleaning, setting the cutting height or replacing the blades. The power switch must always be switched off when the machine is turned upside down.
If the mower’s
2 – English
