Hardware Information

Thermal Printer

The ICE 5700 terminal integrates a high-speed, six lines per second, thermal printer that provides quiet and trouble-free operation. Since the thermal printer does not use a ribbon, its support requirement is reduced. The small number of moving parts results in improved reliability.

The thermal paper allows high-quality printing with a long receipt life. When using the correct paper, receipt life or the time before fading exceeds five years.

Auto Receipt Cutter

The most troublesome component of any POS terminal is the printer. The auto receipt cutter on the ICE 5700 is designed to eliminate the need to manually tear the receipt. The first receipt prints and cuts, then the second receipt prints and cuts. Users do not have to manually tear the paper from the terminal, eliminating paper jams.

High-Speed Modem

The ICE 5700 terminal incorporates the new Hypercom FastPOS™ 9600 bps modem. While fully compatible with the current 300, 1200, and 2400 bps modems, the FastPOS modem, when working with a FastPOS network node, provides 9600 bps throughput for transactions, batches, and software downloading.

FastPOS uses a new technology to achieve 9600 bps throughput and 0.5 second training times at a cost that is comparable to the cost of 2400 bps modems.

FastPOS results in faster transactions and lower transaction costs. For example, at a 5-cents-per- minute 800 dial rate, with a 1-second billing interval, a FastPOS transaction costs less than 0.5 cents. More importantly, FastPOS enables large data blocks to be transmitted without a cost penalty. Many of the new opportunities created by the touch screen of the ICE 5700 become more practical when high- speed communications are available.

Memory

The ICE 5700 terminals contain a minimum of 1MB of RAM.

Power Requirements

The power requirements for the ICE terminals are 24VDC, 1A; 85-250 VAC, 50/60 Hz, 15VA.

940310-001, rev. A

Hypercom Corporation

1-5

Page 21
Image 21
Hypercom ICE 5700 manual Thermal Printer, High-Speed Modem, Memory, Power Requirements, Auto Receipt Cutter