Chapter 4
3.Insert the male connector on the 12-foot cable from the terminal transceiver into the female connector on the single-unit adapter cable.
If the 12-foot cable is not long enough, it may be extended up to 100 feet by using any six-conductor, one-to-one standard telephone extender cable available at various electronic appliance retail outlets. The cable may be extended up to 1000 feet by substituting a terminal transceiver interface for the single unit adapter cable.
WARNING
To avoid damaging the terminal transceiver unit, do not insert the cable connectors from the single unit adapter or the terminal transceiver into any receptacle designated for use with the premises telephone system.
Extending Basic Coverage Area
If the basic system does not cover enough space or major gaps exist in the coverage, you can extend the area covered. The example in Figure 4-2 shows how to extend coverage or fill in gaps by adding a terminal transceiver interface and an additional terminal transceiver.
Figure 4-2. Extending basic coverage
4-4 | ICE 5700 Hardware and Installation Operators Manual | 940310-001, rev. A |
