![](/images/new-backgrounds/1203284/20328473x1.webp)
Wireless POS Terminal Interface
Basic System
Figure 4-1 shows the basic ICE configuration. The terminal transceiver should be less than 100 feet from the peripheral terminal device. This short range reduces the possibility of interference with other communication systems using the same radio spectrum. Causing such interference is a violation of FCC regulations.
Figure 4-1. Basic configuration
Basic System Installation
Use the following procedure to install the basic system wireless hardware.
Step-by-Step
To install the basic system:
1.Ensure the host terminal is properly configured and connected for use as a standard POS terminal.
See the manual provided with the host POS terminal.
2.Mount the terminal transceiver, Hypercom P/N
Hypercom Corporation |