If unit fails to operate properly
Carefully read the instruction to make sure the unit is being operated properly. Check the following before you take your unit to the local dealer for repair.
SYMPTOM | POSSIBLE CAUSE | SOLUTION |
|
|
|
No sound | The volume control regulator set in the | Adjust sound level |
| minimal position |
|
|
|
|
| Bad power connections | Check to see that all the power and speaker |
|
| leads are securely connected |
| The audio cassette receiver is damaged | Take your unit to the local dealer for repair |
Unnatural sound | Acoustic system cables are connected | Check to see that all the power and speaker |
| without observance of polarity (+ or | leads are securely connected |
| Damage speaker wire or speaker | Replace the speaker or speaker wires |
| The audio cassette receiver is damaged | Take your unit to the local dealer for repair |
NOTE: Good ground connections eliminate most electrical noise problems and require tight contact with the metal vehicle chassis. Remove plastics, paint or rust for good electrical contact.
28
