Anti-theft system
Removing the panel
1.Press POWER button to switch off the power of the unit.
2.Press OPEN button to flip down the panel (the right side of it will get detached).
3.Push the panel to the left and take it.
4.Use a special case when you get out of the car and take it with you.
Removing the unit
1.Remove the panel and the trim plate.
2.Insert both
3.Pull out the unit.
Attaching the control panel
1.Insert the left side of the control panel into the main unit and press it. Note: the control panel must be attached into the
2.Insert the right side into the main unit.
3.Close the panel and press it until a “click” sound is heard
Caution:
DO NOT insert the control panel from the right side. It can damage the control panel.
The control panel can easily be damaged by shocks. After removing it, place it in a protective case and be careful not to drop it or subject it to strong shocks.
The rear connector that connects the main unit and the control panel is an extremely important part. Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.
20
