Hyundai H-CMD4015 instruction manual Auto store/Preset scan Auto store, Stereo/Mono

￿￿Press a preset button (1-6) on the remote control briefly or click preset icon (1 -6) on the touch screen to recall the stored station. You can also recall the stored station by pressing PREVIOUS/NEXT buttons on the remote control.

Auto store/Preset scan

Auto store:

Pressing and holding the AS/PS button on the head unit or remote control, or pressing and holding the icon

on the touch screen to start auto store. The radio will scan radio station from the current frequency, and automatically store the 6 strongest stations into the preset memories. When auto store is complete, the radio will start preset scan of the stored 6 station.

Preset scan:

Press the AS/PS button on the head unit or remote control, or press the icon on the touch screen to scan

each preset station. If the field strength level is more than the threshold level, the radio will hold at this preset station for 5 seconds with sound output, then go to next station until all 6 FM stations are scanned, finally the radio will play at the preset station where scanning started. Press the AS/PS button again to stop preset scan.

STEREO/MONO

FM station is received in stereo mode. However, if the signal weak or reception is not as good as you would like, switching to MONO mode usually improves the overall sound quality.

Press the MO/ST button on the remote control or click the icon on the touch screen to choose FM STEREO

or MONO audio effect.

34