Hyundai Q321, Q401, Q320, Q261 manual VCR Setting Number Table

How to Use an External Device Using the Remote Control

When setting other manufacturer s product using the remote control, some of the buttons on the remote control may not operate or different functions may be activated, or some of other manufacturer s products may not work. Some of DVD/VCR combos are allowed only either in DVD mode or VCR mode.

1. Turn on the external device you want to set.

2. Whenever you press button on the remote control, the mode shifts TV

VCR DVD CATV	in order.
3. If the external device has been chosen, press the		button and	button
at the same time for two seconds.

4. Enter an appropriate 3-digit number of the manufacturer from the DVD Setting Number Table. (If the product brand you want to set has multiple setting numbers, attempt to enter the setting numbers repeatedly until the product is turned off.)

5. When the product has turned off, press the button again.

(The appropriate button associated with the product will flash 3 times to show the product operates properly.)

6. Check that the Power button works normally and then check that other function buttons work normally.

If the Power button works normally but other function buttons do not, repeat the above steps from the beginning.

Depending on product brands or setting numbers, the power button may work normally but other function buttons do not work.

VCR Setting Number Table

APPENDIX

75