Step 3: TV and Video Component Hookups

Required cords

Video cord for connecting a TV monitor

YellowYellow

Audio/video cords (not supplied)

When connecting a cord, be sure to match the colour-coded pins to the appropriate jacks on the components.

Yellow (Video)

Yellow (Video)

White (L/audio)

White (L/audio)

Red (R/audio)

Red (R/audio)

Jacks for connecting video components

Connect a

To the

TV monitor

MONITOR OUT jack

 

 

VCR

VIDEO 1 jacks

 

 

Digital satellite receiver

VIDEO 2 jacks

 

 

zWhen using the S-video jack instead of the video jacks

Your TV monitor must also be connected via an S-video jack. S-video signals are on a separate bus from the video signals and will not be output through the video jacks.

Notes

When you select VIDEO 1 using the FUNCTION button, the signal is output from the front L/R speakers, but not from the VIDEO 1 VIDEO OUT and AUDIO OUT L/R jacks.

When you use the Video 1 line outputs, please set the unit to 2CH STEREO mode. If the unit is not in 2CH STEREO mode, the line outputs may not function properly.

22