1 2 3

4 5 6

7 8 9

>10 10/0

C/X/x/c/ENTER

AMP MENU

To specify the size, distance, position and height of the speakers

1 Press AMP MENU repeatedly to display 9 SP. SETUP on the front panel display. 2 Sit in your listening position and select the item to be set using X/x.

•Items set in 9 SP. SETUP

–Size of the rear and centre speakers

–Distance of the front, rear, and centre speakers

–Position and height of the rear speakers

3 Set the parameter using C/c.

The selected parameter will appear on the front panel display.

4 Repeat Steps 2 and 3 to set other parameters in 9 SP. SETUP.

If you do not operate the remote for a few seconds, the parameter turns off and is stored in the system.

xSIZE

When you do not connect centre or rear speakers, or move the rear speakers, set the parameters for CENTER and REAR. Since the front speaker and subwoofer settings are fixed, you cannot change them. The default settings are underlined.

•CENTER (centre speaker)

–YES: Normally select this.

–NO: Select this if no centre speaker is used.

•REAR (rear speakers)

–YES: Normally select this. Specify the position and height to implement the Digital Cinema Surround modes in the “Virtual” sound field (page 47) properly.

– NO: Select this if no rear speaker is used.

Started Getting

continued

25