Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 6 ohm loads, both channels driven, from 120 – 10,000 Hz; rated 40 watts per channel minimum RMS power, with no more than 10 % total harmonic distortion from 250 milliwatts to rated output.
Amplifier section
Stereo mode | 40 W + 40 W (6 ohms at 1 kHz, THD 10 %) |
Surround mode | Front: 40 W + 40 W |
| Center*: 40 W |
| Rear*: 40 W + 40 W (6 ohms at 1 kHz, THD 10 %) |
| Subwoofer*: 80 W (3 ohms at 100 Hz, THD 10 %) |
*Depending on the sound field settings and the source, there may be no sound output.
Inputs (Analog) | VIDEO 1, 2: |
| Sensitivity: 150 mV |
| Impedance: 50 kilohms |
Inputs (Digital) | VIDEO 2 (optical): |
| Sensitivity: – |
Outputs (Analog) | VIDEO 1 (AUDIO OUT): |
| Voltage: 2 V |
| Impedance: 1 kilohms |
| PHONES: |
| Accepts low- and |
Outputs (Digital) | DIGITAL OUT (CD) |
| Sensitivity: – |
SACD/DVD system
Laser | Semiconductor laser |
| (SACD: λ = 650 nm) |
| (CD: λ = 780 nm) |
| Emission duration: continuous |
Signal format system | NTSC or NTSC/PAL |
Frequency response (at 2 CH STEREO mode) | |
| DVD (PCM): 2 Hz to 22 kHz (±1.0 dB) |
| CD: 2 Hz to 20 kHz (±1.0 dB) |
More than 80 dB (VIDEO 1 (AUDIO) connectors only) | |
Harmonic distortion | Less than 0.03 % |
FM tuner section
System | PLL | ||
North American model: | 87.5 | – 108.0 | MHz (100 kHz step) |
Other models: | 87.5 | – 108.0 | MHz (50 kHz step) |
Antenna | FM wire antenna | ||
Antenna terminals | 75 ohms, unbalanced | ||
Intermediate frequency | 10.7 | MHz |
|
AM tuner section
System | Tuner section: |
| PLL |
| continued |
Information Additional
77